2A6X4 Air Force

Which air force specialty code (AFSC) identifies the awarded specialty in which an airman is most highly qualified to perform duty?

A control Air Force specialty code (CAFSC) is used to identify an?

What source provides the career knowledge training required for upgrade to the 5-skill level?

Which tasks require the initials of a certifying official in the last column of a specialty training standard (STS)?

As an aircraft fuel systems journeyman, what are your duties regarding hazardous materials?

Responsibility and accountability for mission results rests with which commander?

What are three types of wings?

Which of the 3 different types of wings is responsible for operating the primary mission equipment?

Which organizational group is concerned with the maintenance of air and space weapon systems?

To whom is the component maintenance squadron commander responsible to for overall squadron management?

Precision measurement equipment laboratory (PMEL) personnel are assigned to which flight?

Maintenance and repair of gaseous and cryogenic servicing units are performed by which flight?

Who is responsible to make sure there is a balance between sortie production and fleet management?

Responsibility for establishing procedures to clear repeat and recurring discrepancies rests with the maintenance...

Responsibility for enforcing sound maintenance practices rests with the...

Who ensures there is an orientation program developed for all newly assigned personnel?

Who advices maintenance managers of support problems and recommends corrective actions?

Advising the wing staff on operational capabilities, limitations, and status of resources is a function of the...

An over-the-shoulder evaluation of a technician or supervisor accomplishing a maintenance action is a?

The product improvement program emphasizes and promotes...

What type of workcards may be authorized for use during contingencies?

Which type of inspection is a flight preparedness check?

Which type of inspection looks for cut tires, foreign object damage covers, and removal of safety pins?

Which type of inspection is applicable to aircraft conducting an immediate turnaround?

Which inspection augments the basic post-flight?

The main objective of the phase inspection is to reduce...

Which inspection is a thorough and searching "look, see, and fix" of the weapon system and each of the requirements may be more extensive in scope?

Which inspection consists of checking certain components, areas, or systems to ensure no condition exists that could result in failure before the next scheduled inspection?

What type of inspection is performed on all newly assigned aircraft?

What type of inspection is conducted when an aircraft is examined with sufficient thoroughness to determine its mechanical fitness for flight and the completeness of its equipment and supporting documents?

Which inspection is outlined in the -6 technical order and differs from other types of inspections in that only one part of the aircraft or item requires inspection?

During an inspection, when are all write ups found and documented?

During an inspection, when does the performance of operational checks and functional check flights begin?

When you clear a discrepancy on an AF Technical Order (AFTO) 781, what will be placed over the symbol?

What type of entry on AFTO Form 781A, Maintenance Discrepancy and Work Document, does not require a symbol?

Prior to performing maintenance, you review the AFTO 781's, to ensure...

On the AFTO form 781H, after refueling the aircraft, the person who performs or supervises the operation puts their name in block 14 using what form?

What part of the AFTO Form 244 provides a means to document a quality control review of the form?

Which section of AFTO Form 244 is used to document delayed discrepancies and overdue time changes?

In which AFTO Form 95 block do you enter the manufacturer's name?

After a permanent repair on a fuel tank is accomplished, the AFTO Form 427, Aircraft Integral Fuel Tank Repair Historical Data Document, is...

What percentage of all accidents is due to natural causes, such as lightning, storms, or floods?

What may be considered to be the direct cause of any accident?

The first rule of good housekeeping is...

Many accidents can be prevented by simply...

What are 3 examples of internal distracters?

The main purpose of ground mishap reporting is to...

An accident on the flightline has resulted in the death of a civilian worker. What kind of mishap would this be considered?

An accident has resulted in the hospitalization of three or more personnel. What kind of mishap would this be classified as?

Which of these results would categorize an accident as a Class C mishap?

Which of these phrases best describes effective grounding?

The purpose of bonding is to eliminate...

What should you use to prevent other maintainers of inadvertently operating devices such as landing gear and flight control surfaces?

What type of communication may be used during ground refueling operations?

Two major contributors of FOD are poor...

The three general classes of FOD are...

What are 2 proven methods used to control FOD?

Volatility is the rate at which fuel...

One of the most common signs of excessive fuel vapor inhalation is?

What action must be taken regarding a Class 1 fuel spill on the flightline?

Which class of fuel spill is considered a group mishap, and requires response by the senior fire official on the installation?

Nitrogen can be dangerous because it?

At what percentage of oxygen is the atmosphere level considered to be oxygen deficient?

Respirator training must be documented on what AF form?

How often should individually issued respirators be cleaned and sanitized?

How often must respirators stored for emergency or rescue use be inspected?

Which footwear items are authorized for wear inside a fuel cell?

Who determines the type of hearing protection required for all aspects of your job?

What type of index TO is most frequently used?

Which condition would be reported using the deficiency reporting system?

Which is not listed by the index TO?

Category 1, deficiency reports, must be submitted within...

Which is a complete listing of TO's for a specific weapons system?

Which form is used to document a repair action that has been accomplished on a repair cycle item as a result of a maintenance turnaround?

What type of operation and maintenance (O&M) technical order will give you detailed theories of operation?

Which element of base supply manages all due-in from maintenance (DIFM) material?

What type of operation and maintenance TO enables you to isolate a malfunctioning component?

What procedures are used to relieve personnel of property responsibility?

What type of TCTO is issued for conditions that could result in a fatality if not corrected?

The Air Force supply system...

Which TCTO requires compliance within a specified time limit of 1-10 days?

The term "custodian" as applied to the Air Force supply system refers to a...

Which time compliance technical order (TCTO) can be identified by a border of alternately spaced red diagonals and red X's on the title page?

Commanders must ensure that records of supply transactions are....

What type of TO's are general in nature?

The responsibility of a person to make good any loss, destruction, or damage of government property caused by misuse or negligence is known as what kind of liability?

Which TO will give you detailed information on how to correctly complete AFTO forms?

Who allocates the money used to buy Air Force property?

What type of TO is mainly a work simplification device?

Which supply element is the first point of contact in the process of obtaining material from supply?

Inspection requirements from the -6 inspection TO is listed in...

Which system allows logistics personnel, customers, and commanders to track every item in the supply system through standardized procedures?

Which abbreviated TO is meant to be followed step by step?

What does the fourth part of a Maintenance Integrated Data Access System (MIDAS) manual number identify?

What does the first number of a TO number designate?

What does the fifth part of a MIDAS manual number identify?

If the aircraft TO number only has 3 parts, what does the 3rd part identify?

What are the three authorized types of TO improvement reports?

A work stoppage caused by a TO deficiency is considered to be a basis for what kind of TO improvement report?

Which AFTO Form 22 report requires a response within 45 calendar days after receipt?