2A6X1 Air Force

To which flight is the engine management section assigned?

When you are assigned to an aircraft maintenance squadron as an engine troop, to what flight will you most likely be attached to?

What does the fifth position of the Air Force specialty code (AFSC) 3A652 represent?

How many months must you have in the Air Force before you may attend the Airman Leadership School (ALS)

Air Force Occupational Safety and Health (AFOSH) Standards are located within Air Force publication series

How far does a propeller's axis of rotation extend?

When approaching or leaving a helicopter with the blades rotating, all personnel need to remain in full view of the

Foreign object damage (FOD) is normally caused by

Which of the following is a general physical classification of toxic materials?

As a propulsion journeyman, during flight-line and test cell operations, you may be exposed to

Which person or agency is responsible for providing you with training on how to wear, use, and maintain personal protective equipment (PPE)?

What would you normally use to clean and sanitize respirators?

Hazardous waste storage areas must prevent

Containers holding hazardous waste must be clearly marked to show the contents and

A specialized function of the Supply mission is

From what perspective does the Global Logistics Support Center (GLSC) manage supply?

Which base supply function manages the repair cycle systems

Selected equipment items, when returned to depot because of their design characteristics function or application, are predetermined to require

Which supply document provides a means for organization to review all document numbers processed during the day by the Standard Base Supply System (SBSS)?

When you have completed the removal of items such as engines, end items, components and sub-assemblies, you complete AFTO From 350 to identify

Which form do you submit when you determine that a first-time request part will become a recurring one and, therefore, the stock levels need to be adjusted?

Serviceable items, when received from supply and ready to use, each have attached Department of Defense (DD) Form

Which item is one that a storage time period must be assigned to ensure that it will perform satisfactorily over a specified period of time?

In the case of a failure trend that may contribute to accidents, deficiency reports (DR) are forward to

A Category I deficiency report (DR) is used to report a deficiency

Within how many hours must category I deficiency reports (DR) be forwarded to the originating point?

Which type of items must be reflected on the Custodian Authorization/Custody Receipt Listing (CA/CRL)?

When should new equipment account custodians receive training?

The first section of a technical order (TO) number identifies the

In which type of technical order (TO) would you find a list of TOs for a specific category of equipment?

Which technical order (TO) describes the Air Force To system?

Which type of technical manual (TM) is divided into tasks that cover a particular maintenance action?

Which type of manual is used by maintenance personnel as a means of identifying and rectifying system or component malfunctions?

Which time compliance technical order (TCTO) category is issued to correct hazardous safety conditions that can result in a fatality or serious injury to personnel?

Which technical order (TO) covers all information concerning the Air Force TO sytem?

An Air Force technical order (AFTO) information management tool (IMT) Form 22, Technical Manual (TM) Change Recommendation and Reply, is not submitted for

Which person or office makes sure the Air Force technical order (AFTO) information management tool (IMT) Form 22 is valid and warrants submission?

Which Air Force technical order (AFTO) information management tool (IMT) Form 22 recommendation would you submit, if not corrected, could cause personnel injury or damage to equipment or property?

What are the two classifications of failures in the reliability centered maintenance (RCM) approach?

Which program integrates hardware, software, maintenance, and diagnostic processes to quantify and monitor/manage engine health

The primary goal of the engine trending and diagnostics (ET&D) program is to prevent or limit damage to turbine engines by

Within the engine trending and diagnostics (ET&D) program, to whom do flight-light personnel transfer collected data for analysis?

What drives the creation of a centralized rotatable pool (CRP)?

Who maintains accountability of centralized repair facility (CRF) assets and reports their status?

What supports base-level technicians by providing technical assistance and performing any repairs beyond their responsibility/ capability?

Depot level support includes depot field teams (DFT) and

A primary objective of the engine reporting system is to

The key to making the Comprehensive Engine Management System (CEMS) work is

For how many categories of reporting does the Comprehensive Engine Management System (CEMS) establish and maintain records?

You should record the removal and replacement of engine accessories on which Air Force technical order (AFTO) form?

The purpose of the Lead the Fleet/Pacer programs is to

How many years ahead should participating units accelerate engines, modules, and accessories

You should wear eye protection when you work

What would you use to hold your tools when you cannot locate your toolbox within arm's reach?

Which technical order (TO) covers calibration procedures for torque wrenches?

If you must torque a sequence of three or more bolts

The length of a torque extension is determined by the distance between the center of the square drive and the center of the

The longest calibrated movement between the spindle and anvil of an outside micrometer is

The vernier scale on a micrometer is used to read measurements in

Where is the contact point on a dial indicator located?

How many range settings can you use when measuring voltage with the Fluke 8025A?

One reason the bore scope is not intended to take the place of, or be as thorough as, a periodic teardown inspection is because

A rigid bore scope requires

When operating a bore scope , what part of the bore scope illuminates the interior of the area you're inspecting?

Which type of bore scope misuse cause a poor field of view (black spots)?

Do not use self-locking nuts on

Which type of nut should never be used in areas where the temperature exceeds 250F?

The shank of a screw is defined as the

When installing a self-taping screw, the hole must be

what type of washer would you use to prevent scoring of machined surfaces?

To prevent damage to the soft metal surfaces and a lock washer is required, what should you use?

Cotter pins are used for safetying various units such as

When you are lock wiring two units together, the first unit holes should be between what o'clock positions?

When lock wiring , how many twists per inch are required to produce the proper stiffness?

You can identify the various system lines used to transfer fluids and gases on jet engines by

When removing or installing tubes from jet engine components, what numerical value is given to a fitting used on tubing that measures 3/8 inch?

When removing components from a jet engine, why is it necessary to carefully remove clamps when disconnecting tubes from those components?

After any jet engine maintenance has been performed, why is it necessary that dust caps be installed over tube ends rather than inside them?

Which type of hose assemblies are exempt from shelf-life storage?

Never use oil as an aid to installing

When disassembling the oil filter, why should you always use a clean container?

What do you use to seal male flared-type fuel drain fittings on an engine being prepared for air shipment?

You must completely seal an engine being prepared for an air shipment to prevent

Preservation of a component being shipped is required when it is being returned to depot or stored for more than how many days

The shroud-type jet engine cover consists of a buildup of how many layers of wrap?

Which technical order (TO) covers the disposition of engines removed from aircraft involved in mishaps?

If a stored engine/module is in the shipping container, the container will be sealed and pressurized with dry nitrogen to what pounds per square inch, gauge (PSIG)?

To release the internal air pressure in a shipping container/module, you must remove the

When removing the shipping container lid from the shipping container, how much are the turn lock fasteners turned?

What color is a serviceable humidity indicator on a shipping container?

How many pins secure the adapters to the shipping container support?

During the "over180 days" engine preservation period, the fuel system is maintained full of

To prepare the jet engine fuel system for service after depreservation, you must flush the system with

When can you consider a depreserved jet engine ready for service?

Which factor is important in causing corrosion

On the personnel maintenance platforms, the purpose of the platform safety lockpins is to

You adjusted the maintenance platform to 4 feet? which platform are you using?

You adjust the maintenance platform between 7 and 12 feet? which platform are you using?

What information is found in Part I of an Air Force technical order (AFTO) Form 244, Industrial/Support Equipment Record?

Which program's purpose is to ensure safe and healthy working conditions for all Air Force employees?